Wednesday, April 11, 2012

BHALDI has landed (we have help from pros)

Here is the email correspondence from the folks at BHALDI (Kerry and Ryan)  That is Kerry's picture over to the right of this post, as he is now tracking the blog. If anyone has additional questions, please email them to me and I will pass them on.
Here is the email trail:  Kerry's responses are in Blue


A good balloon filling/ascent speed/burst height calculator and flight track prediction software. We are using a package out of Cambridge at the website: http://habhub.org/predict/#!/uuid=369def4e1e897096767cc17d956d05db7c4837e2
We have used a couple different predictors. The one we use and the one used by Prof. Flaten is here: http://nearspaceventures.com/w3Baltrak/readyget.pl

It is not as easy to use - pretty clunky actually. I ran a model with each assuming a launch today at 10 am from Burnsville. The models produced similar bearings but the Cambridge one showed a significantly longer flight path. Not sure what the difference is - I think they are using similar data sources. I've attached the results from each. I also sent the results to Prof Flaten to see what he thinks about the predictor you are using. I like it better from a usability perspective, but accuracy is obviously pretty important. Could be that their atmospheric model may be Euro-centric and not be a good for North America.  FYI - I just reran the models and this time the results were almost identical. I think I must have chosen the wrong time period in the NSV model the first time. Thanks for the Cambridge alternative - we'll use that one as well in future launches and see which works better!

How have you prevented fogging of the windows in the cooler? We considered “filling” the cooler with helium right before sealing it. However, given the air pressure differences aloft, we may not want a tight seal on the cooler, such that the pressure equalizes.
We haven't used windows - we just cut holes in the cooler and stick the lenses through. That has worked pretty well with the still cameras, but we used a waterproof case around a Go Pro video camera and had condensation issues. We're still discussing how we will try to resolve those. Pretty sure trying to make the cooler airtight would result in a broken cooler.
What winds speeds have you experienced aloft? We are thinking on how to minimize spinning and anything breaking/whipping in the wind. We have a pretty sturdy cooler picked out, but have considered a bait bucket for it’s better aerodynamics and it just seems like the Minnesota thing to do. The windows would be harder to put in though. Always trade-offs.
I'm concerned that a bait bucket would be a) heavy and b) non-insulating. Keeping the electronics warm enough to perform is one of the biggest challenges. We have used hand warmers in the past and are considering using some small battery-powered radiant heaters for future launches. Coolers, and foam in general, is a great combination of light weight and insulating.
We are planning on using the Spot GPS tracker. We are strongly considering renting two of them, and having redundancy on the GPS. Plus we would get more frequent position updates with two GPSs on board. Your thoughts? We found a rental place for $80/unit/month – all tracking services included.
SPOT is a good choice. We also have used Ham-radio based GPS units borrowed from Flaten. They are a bit more work and add some weight, but provide higher data resolution and also remain working at all altitudes, where the SPOTs shut off at 60,000 ft on the way up and turn back on at 20,000 ft on the way down. So you are in the dark for quite a while which is a bit nerve-racking. So far we are 5-for-5 though... (again, knock on wood).
Have you done anything to make the payload easier to find when it is back on the ground and/or anything special for if it gets caught up in a tree? We were thinking of attaching 100 feet of ribbon, so you could spot it easier and have something to yank it out of a tree by. We were considering a small weight on the end of the ribbon to keep it from whipping around in the wind and getting caught in the parachute.
We have not done anything, but we probably should do more. Not sure about ribbon, but we have considered putting a small Radio Shack siren on them. We have not used them yet because we have wanted the audio from the flight and didn't want an annoying siren throughout. Again, maybe we've been lucky and should be using the sirens, but so far so good...

No comments:

Post a Comment